JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for the best temperature control results. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are matched specifically with each JULABO temperature control unit. JULABO Thermal bath fluids have been carefully selected and optimized for maximum performance with JULABO instruments.
Thermal H350 is a light brown to colorless 47 cSt hydrocarbon-based fluid rated for use in JULABO Forte HT high temperature heating circulator units only with a working temperature range of +50…+350 °C. This temperature range is only valid when used in Forte HT systems! The internal Forte HT cold oil overlay technology enables for safe operation above the fluid flashpoint. For use with: Forte HT30-M1, HT30-M1-CU, HT60-M3, HT60-M3-CU.
Benefits
- Low Toxicity
- Low viscosity
- High stability
- Minimum odor
- Good heat conductivity
- Low corrosion tendency
- Wide temperature ranges
Specifications
| Working temperature (°C) |
+50...+350, in Forte HT units only |
| Flash point (°C) |
210 |
| Fire point (°C) |
235 |
| Viscosity (kinematic at 20 °C in mm²/s) |
47.1 |
| Density (at 20 °C in g/cm³) |
1.04 |
| Pour point (°C) |
< -34 |
| Boiling point (°C) |
390 |
| Ignition temperature (°C) |
450 |
| Color |
light brown |
Documentation
